Filter
Top Products
Fault Possible cause and solution
F73
or
"Check the brew
unit"
The brew unit cannot be positioned correctly.
^
Turn the machine off with the On/Off K button.
^
Remove and clean the brew unit (see "Cleaning and care –
Brew unit").
^ Push the coffee ejector of the brew unit into the correct
position (see diagram).
^ Do not insert the brew unit. Close the appliance door and
turn the machine on with the On/Off - sensor.
This will initialize the brew unit motor and put in back into the
start position.
^
When "Insert the brew unit" appears in the display, open
the appliance door and put the brew unit back in the
machine.
Then close the door.
Frequently Asked Questions
60