Open as PDF
G600 & G800 Electronic Dishwashers
6.2.9 Width of Unit (As Applicable)
Some Electronic Units can be installed in more than one specific model
number; and therefore require programming the width of the
dishwasher it is being installed in. Refer to the model Specific
Programming / Service Modes Section for further details.
To ensure proper appliance operation…The Electronic must be
programmed for the width of the dishwasher (Fullsize / Slimline) it is
6.2.10 Flowmeter Count
Stores the “numeric value” marked on the side of the Flowmeter to
ensure proper operating conditions.
To ensure proper appliance operation…The Flowmeter count must be
re-programmed after installation of a new Flowmeter and / or
6.2.11 Operating Hours
Records the duration (in hours) the appliance has been operated.
6.3 Programming / Service Modes - Access
Refer to the Dishwasher Service Modes Guide;
included at the rear of this section.