Open as PDF
G600 & G800 Electronic Dishwashers
5.23 Microfine Filter – Exchange
Refer to figure 5-21.
1. Open the Door.
2. Remove the Filter Assembly from the dishwasher.
Figure 5- 21: Microfine Filter – Replacement
3. Cut the old Filter combination apart at the Snap Fitting between the
Handle and Microfine Filter (Item 4).
4. Open the Filter Cap on the new Microfine Filter.
5. Place the Handle and Microfine Filter together as shown in Figure
Ensure the cutout on the Handle (Item 1), must align with the
cutout on the large surface area fine Filter (Item 2).
Ensure the The retaining lug on the new Microfine Filter (Item 3),
aligns with the cutout on the Handle (Item 1).