Filter
Top Products
Moving the shelves
The shelves in the refrigerator section
can be adjusted according to the
height of the food.
^
Lift the shelf, pull it forwards slightly,
lift the recess over the support ribs
and move the shelf up or down.
The edge of shelf's rear stop must face
upwards so that food does not touch
the rear wall and freeze to it.
Stops prevent the shelves from being
pulled out accidentally.
Split shelf
In order to accomodate tall items such
as tall bottles or containers in the
appliance, one of the shelves is
divided. The front section can be gently
pushed under the rear section:
^ Push the rear half of the glass shelf
up slightly.
^
With the rear half pushed up, lift the
front half of the glass shelf slightly,
then slide it carefully under the rear
half.
To move the split shelf
^
remove the two halves of the glass
plate and
^
place the two support rails left and
right on the support ribs at the
desired height,
^ slide the glass shelves in one after
the other.
The glass shelf with the limit stop
must be placed at the back!
Fruit and vegetable
drawers on rollers
The fruit and vegetable drawers are
mounted on rollers and can be pulled
out for loading and unloading. The
roller plates can be removed for
cleaning.
Adjusting the interior fittings
27