Filter
Top Products
^
Hang the panel b on the shock
absorber arm d.
^
Pull the shock absorber arm d
towards the hinge bracket and insert
the pin e from the top so that the
square rests in the recess.
^ Put on the cover f in such a way
that it engages.
Take care that the cover f sits
correctly to ensure that the door closes
properly and the pin is secured.
^ Remove the securing device g.
^
Place the panel b onto the soft-close
mechanism from above, engaging it
at the bottom first and then at the top.
^
Close the bottom door of the
appliance.
Mounting the top door of the
appliance:
^
Place the top door of the appliance
onto the bearing pin i in in the
middle of the appliance.
^ Close the top door of the appliance.
^ Put the hinge bracket n on the
opposite side and and fasten it with
the screws m.
The screw holes may have to be
pre-punched or use a power
screwdriver.
^
Now place the cover k on the other
side.
^
Align the appliance door with the
appliance housing via the elongated
holes in the bottom hinge bracket .
Tighten the screws.
Changing the door hinging
56