Filter
Top Products
Burners
The burner can be dismantled and
cleaned when cool.
Dismantling and cleaning
^
Remove the burner parts and wash
them in a solution of hot water and
liquid dish soap.
^
Dry them thoroughly. Make sure that
the flame holes are clean and
completely dry.
The shiny surfaces of the burner caps
will dull with time and usage. This is
normal and will not affect the operation
of the cooktop.
^ Clean the burner base, the ignitor
and Ignition Safety Control with a
damp cloth and then dry with a soft
cloth.
The ignitor must be thoroughly dry, or it
will not spark.
Reassembling the burner
Be careful not to mix up the parts. Make
sure that all the locating tabs and
notches align exactly.
^ Place the burner head, m, onto the
burner base, n, so that the Ignition
Safety Control, o, and ignitor, p,
extend through their respective holes.
^
Return the burner cap, l.
^
Return the pan support.
Cleaning and Care
16