Filter
Top Products
... the sensors are over sensitive or
do not react at all.
The sensitivity level of the sensors has
changed. It can be corrected as
follows:
–
Make sure that there is no direct light
(from the sun or from an artificial
source) falling onto the hob and that
the surrounding area is not too dark.
–
Make sure that there is nothing
covering the sensors or the hob.
Take any pans off the hob and wipe
away any food deposits.
– Interrupt the power supply to the hob
for approx. 1 minute.
Reconnect the hob to the electricity
supply. The electronic unit will reset the
sensitivity levels of the sensors.
If this action does not solve the problem
please call the Miele Service
department.
Problem solving guide
32