Filter
Top Products
Combi mode
The minute minder and automatic
switch-off functions can be used at the
same time.
If you have programmed in one or more
switch-off times, and would like to use
the minute minder as well:
Touch the m sensor repeatedly until
the minute minder indicator lamp
flashes.
If you are using the minute minder, and
would like to programme in one or more
switch-off times as well:
Touch the m sensor repeatedly until
the indicator lamp flashes for the
cooking zone required.
Shortly after the last entry, the shortest
remaining time will come up in the
display. If you want to check on another
remaining time, touch the m sensor
until the relevant indicator lamp flashes.
Starting with the shortest remaining
time which is showing in the display, all
cooking zones that are in use and the
minute minder are selected clockwise.
Timer factory settings
The timer is set at the factory so that it
starts with 01 or 99 when the + or -
sensor is touched.
This setting can be adjusted so that the
time you last used appears in the
display when you press + or - (see
"Programming - P4.").
Example:
If P4., S1 has been programmed, and
the last time the minute minder was
used was for 5 minutes, 00 will appear
in the display when you switch on the
Timer; when you then touch + or -, the
display will change to 05.
You can still select any time you want,
even if you have adjusted the timer
default setting.
Timer
40