Filter
Top Products
Installation
Flush fit hobs are only suitable for
installation in granite, marble, tiled or
solid wood worktops. Other
materials such as Corian and
Askilan are not suitable.
This appliance requires a 800 mm
wide base unit for installation.
The hob must be accessible from
below for servicing purposes and to
ensure that the seal around it is not
dislodged.
The hob can be installed
–
in a suitable cut-out in a granite or
marble worktop.
–
in a suitable cut-out in a tiled or solid
wood worktop with a wooden support
frame. The frame must be provided
on site, and is not supplied with the
appliance.
Flush-fitted hobs
77