Filter
Top Products
Problem Possible cause Remedy
The hob switches off
while it is in use and an
F flashes in the timer
display.
One or more of the
sensors have been
covered, e.g. by finger
contact, food boiling
over or by an object
such as an oven glove.
Clean the control panel or
remove the obstruction (see
"Safety switch-off").
The food in the pan
hardly heats up or does
not heat up at all when
the Auto heat-up
function is switched
on.
There is too much food
in the pan.
Start cooking at the highest
power level and then turn
down to a lower one
manually later on.
The pan is not
conducting heat
properly.
The cooling fan
continues to run even
after the appliance has
been switched off.
The fan will continue
running until the
appliance has cooled
down. It will then
switch itself off
automatically.
The sensors are
over-sensitive or do not
react at all.
The sensitivity level of
the sensors has
changed.
Make sure that there is no
direct light (from the sun or
from an artificial source)
falling onto the hob and that
the surrounding area is not
too dark.
Make sure that there is
nothing covering the sensors
or the hob. Take any pans off
the hob and wipe away any
food deposits.
Interrupt the power supply to
the hob for approx. 1 minute.
If this does not solve the
problem, please call the
Miele Service department.
Problem solving guide
52