Filter
Top Products
Problem Possible cause Remedy
The sensors are
over-sensitive or do
not react at all.
The sensitivity level of the
sensors has changed.
Make sure that there is no
direct light (from the sun or
from an artificial source)
falling onto the hob and that
the surrounding area is not
too dark.
Make sure that there is
nothing covering the sensors
or the hob. Take any pans off
the hob and wipe away any
food deposits. Interrupt the
power supply to the hob for
approx. 1 minute. If this does
not solve the problem, please
call the Miele Service
department.
FE flashes alternately
with numbers in the
timer display.
FE 44 The overheating protection
mechanism has triggered.
See "Overheating protection".
FE 47 The fan is either blocked
or faulty.
Make sure it has not been
blocked by something like a
fork. Remove the cause of the
blockage. If the fault message
appears again, call the Miele
Service Department.
FE 48
Other fault messages
FE..
There is an electronic
fault.
Interrupt the power supply to
the hob for approx. 1 minute.
If the problem persists after
reconnecting the appliance to
the power supply, please
contact the Miele Service
department.
Problem solving guide
56