Filter
Top Products
Installation instructions
Place the seal provided f under
the edge of the cooktop.
b Appliance
c Tensioning screw
d Clamp
e Countertop
f Seal
Turn the tensioning screws c
counterclockwise until a resistance is
felt, then turn the clamps
d to the
left.
Place the appliance in position, turn
the clamps and tighten the tension-
ing screws until the clamps press
into the countertop
e. Do not use ex-
cessive force.
Connect the appliance to the electri-
cal supply.
When installing several Combiset units,
a stainless steel spacer bar should be
installed between the units. It comes
supplied with its own installation instruc-
tions.
loosen
tighten
Installation instructions
23