Filter
Top Products
Setting the Clock and Timer
(TRX20
only)
IMPORTANT:
Please Read
Before
First
Use
The clock on
this
model must
first
be set, before
the
coffeemaker
will
operate.
hR(3BlTEE
I
*
+
-Control Switch
Off Indicator
I I
L
I
Hour Minute
AUIO
Set
set
!a
To Set the Clock...
1.
Turn
the control switch to OFF.
2.
Plug the power cord into your electrical outlet. The clock display will flash
until you
set
the time.
3.
Repeatedly press or hold the HOUR and MINUTE buttons until you reach
the current time. The PM indicator light in the display will illuminate to indicate
PM time.
To
Prdet
the Brewing Time...
Press and hold the AUTO button while setting the desired brew time with the HOUR and
MINUTE buttons. The PM indicator light in the display will illuminate to indicate PM time.
To Automatically Brew set the
Pre-set
Time...
1.
Follow steps 1 through 5
in
BREWlNG
COFFEE:.
2.
Turn
the control switch to OFF and then to AUTO.
3.
Brewing
will
begin at the time
you
have preset, and the coffee will remain
hot in the decanter for
two
hours. To keep your coffee hot for an additional
two hours,
turn
the switch from AUTO to ON.
IMPORTANT
To
Reset Auto Brew at Pre-set Time...
The programmable timer will NOT automatically brew the
next
day
if
left in the AUTO position
after
its
last
use. This is
a safety
feature. If
the OFF indicator light in the lower right hand corner of the clock
display is illuminated. reset AUTO BREW by turning the control switch
to OFF and then to AUTO.