Open as PDF
Searching TV channels
1 Press and hold DVD/MON for 1 second.
2 Press SYSTEM MENU.
3 Press 1 as often as necessary to select A.
4 Press 4 or 3 as often as necessary to select
y Installation. Next, press 2 to conﬁrm.
5 Press 4 as often as necessary to select
➜ Autom. Search: to search for TV channels
➜ Manual search: to add additional or missing TV
6 Press 2 to enter the selected menu.
Select Autom. Search if new TV channels are available
with your antenna or cable TV system. All previously stored
TV channels will be overwritten.
1 Press 2 to start the automatic search.
➜ Searching for TV channels and xx Channels
found appear, where xx indicates the number of
TV channels found.
2 After the search is complete, press SYSTEM MENU to end.
If not all available TV channels have been found during the
initial installation, you can search for the missing TV channels
1 ➜ Channel/freq. is highlighted.
Press 2 repeatedly to select
➜ CH or S-CH if you want to enter the channel number,
➜ Freq. if you want to enter the frequency of the TV
2 Press 4 to select Entry/search.
3 Press 0–9 repeatedly to enter the channel number or
the frequency of the desired TV channel.
If you do not know the channel number or frequency,
press 2 to start automatic search. Repeat this step until
the desired TV channel is found.
4 Press 4 to select Programme number.
5 Press 0–9 or 3 or 4 repeatedly to enter the programme
number where to store the TV channel.
Note: If Programme number already used appears on
the TV screen, select another programme number. Otherwise
the TV channel with the same programme number will be
6 Press OK to store the new TV channel or SYSTEM MENU
to exit without storing the changes.
7 Press SYSTEM MENU to end.
Sort TV channels
Audio video input
To exit press
Programme number 07
TV channel name PHI
TV system PAL-BG
Fine tuning 0
To exit press