NuTone 8010 Ventilation Hood User Manual


 
Architectural & Engineering Specifications
March 2004
8" Pull-Chain
Thru-the-Wall Fan
MODEL: 8010 SERIES
DESCRIPTION
For average-size kitchens up to 125 sq. ft. or other
rooms up to 310 sq. ft.
No ductwork required: telescoping sleeves adjust
for wood or masonry walls from 5" to 10" thick.
Choose white (Model 8010WH) or silver anodized
aluminum (Model 8010SA) grille.
All outside parts are steel finished in baked enamel for
minimum maintenance.
Motor mounting bracket has two keyhole slots that slide
over two mounting screws on sleeve for faster
installation.
Built-in switch operates from high-test stainless steel pull
chain. Outside door closes tight for positive weather seal.
Refer to NuTone's catalog for a complete line of
accessories to effectively adapt this unit to your
construction requirements.
DESIGN FEATURES
Air Delivery: 250 CFM.
Sound Level: 4.0 Sones
Dimensions: Sleeve: 8
5
8
" I.D. 5" to 10" extension.
Outside Wall Panel: 13
3
4
" sq. x 1
1
4
"
deep including wall mounting flange.
Material & Finish: Housing: Galvanized steel.
Grille: .11" square, Anodized metal
or white finish.
Motor: Plug-in, thermally protected.
Fan Blade: Polymeric, 5-leaf.
Electrical Rating: 120v, 60Hz, 1.8Amp
INSTALLATION
• Installation instructions included with each unit.
• Must be installed at least 5 feet above floor or install
above counter or major appliance.
ARCHITECT'S SPECIFICATIONS
Pull Chain Wall Fan(s) shall be Model 8010SA with
Silver Anodized Aluminum Grille or Model 8010WH
with White Metal Grille as manufactured by NuTone
according to listed specifications. Fan shall ventilate 250
CFM @ .03" S.P. at a level of 4.0 Sones.
CERTIFIED TEST DATA
HVI-2100 CERTIFIED RATINGS comply with new
testing technologies and procedures prescribed by the
Home Ventilating Institute, for off-the-shelf products, as
they are available to consumers. Product performance is
rated at .03 in. static pressure, based on tests conducted in
AMCA's state-of-the-art test laboratory. Sones are a
measure of humanly-perceived loudness, based on
laboratory measurements. This NuTone model is listed by
Underwriters' Laboratories Inc.
8010 Shown