Filter
Top Products
Architectural & Engineering Specifications
March 2004
Deluxe
Exhaust Fan
MODEL: 8833
DESCRIPTION
• Designed for bathrooms up to 75 sq. ft. (6.7 m
2
), other rooms
up to 100 sq. ft. (9.3 m
2
)
• Two-piece grille conceals intake ports. The center panel
is brushed aluminum and can be painted or papered
to match the wall or ceiling surface.
• Centrifugal blower wheel channels air to the outside
through 3" (7.6 cm) round duct.
• Mounting brackets facilitate easy installation between 16"
(40.6 cm) or 24" (61 cm) o.c. joists or studs.
• Built-in precision-fit non-metallic damper. Plug-in motor
‘floats’ on sound-absorbent cushions.
• Refer to NuTone's catalog for a complete listing of
accessories to effectively adapt this Exhaust Fan
to your construction requirements.
DESIGN FEATURES
Air Delivery: 80 CFM (38 LS).
Sound Level: 3.0 Sones.
Dimensions: Housing: 8
1
⁄2" x 9" x 4" deep
(21.6 cm x 22.9 cm x 10.2
cm).
Material & Finish: Housing: Galvanized steel.
Grille: Aluminum, silver anodized
8
9
⁄16
" x 10
7
⁄16"
(21.7 cm x 26.5 cm).
Motor: Plug-in, thermally protected.
Blower Wheel: Polymeric.
Duct Size: 3" diameter (7.6 cm).
Electrical Rating: 120v, 60 Hz, .75 A.
INSTALLATION
• Complete installation instructions are included with
each unit.
ARCHITECT'S SPECIFICATIONS
Deluxe Exhaust Fan shall be NuTone Model Number 8833
as manufactured by NuTone according to listed specifications.
Housing shall be 8
1
⁄
2
" x 9" x 4" (21.6 cm x 22.9 cm x 10.2 cm)
deep. Unit shall ventilate at at 80 CFM at a sound level of 3.0
Sones. Unit shall connect to 3" (7.6 cm) diameter duct.
8833 Shown