Filter
Top Products
NuTone, Inc., 4820 Red Bank Road, Cincinnai, OH 45227 (1-800-543-8687)
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
Architectural & Engineering Specifications
February 2006
QTXEN Series
Fan/Light/Night Lights
MODELS QTXEN080FL,
QTXEN110FL, QTXEN150FL
ARCHITECT’S SPECIFICATION
• Ceiling Ventilator shall be NuTone Model QTXEN080FL
(QTXEN110FL) (QTXEN150FL).
• Ceiling Ventilator shall have corrosion resistant galvanized steel
housing with four-point mounting capability. It shall be ducted to
a roof or wall cap using 6” round ductwork.
• Blower assembly shall be removable, have a centrifugal-type
blower wheel and a permanently lubricated motor designed for
continuous operation and mounted with resilient anti-vibration
mounts.
• Non-metallic damper/duct connector shall be included.
• Lamp shall be 26W fluorescent * with separate 4W night light.
• Air delivery shall be no less than 80 (110) (150) CFM and sound
level no greater than 0.3 (0.9) (1.4) Sones. All air and sound
ratings shall be certified by HVI.
• Ceiling ventilator shall be Energy Star® qualified and have an
energy efficient permanent split capacitor motor.
• Ceiling Ventilator shall be U.L. Listed for use in insulated ceilings
(Type I.C.) and for use over bathtubs and showers when connected
to a GFCI protected branch circuit.
60B 99043400E
DESCRIPTION
BLOWER:
• Plug-in, permanently lubricated motor - engineered for
continuous operation
• Dynamically balanced centrifugal blower wheel for quiet,
efficient performance
• Maintains a high percentage of rated CFM in less than ideal
installations
• Low RPM for quiet operation
• Resilient anti-vibration motor mounts
HOUSING:
• Rugged, 26 gauge, galvanized steel construction
• 6” round ducting for superior performance
• Polymeric duct connector with tapered sleeve and no metallic
clatter
• 7-5/8” height allows for 2” x 8” (nominal) joist installations
• Sturdy, easy, four-point mounting directly to joist
• Includes unique spacer (patent pending) for mounting to
engineered “I” joists
• Can be mounted in ceilings up to 12/12 pitch
GRILLE:
• Polymeric construction
• Innovative design - the result of extensive research with
designers and consumers
• 26W fluorescent lamp * (bulb included) and 4W night light
(bulb not included)
• Durable steel reflector with white enamel finish
CONTROLS (Purchase separately):
• Refer to NuTone’s catalog for a complete line of accessories
to effectively adapt these fans to your construction
requirements.
U.L. Listed for use over bathtubs and showers when connected
to a GFCI protected branch circuit (ceiling mount only).
U.L. Listed for use in insulated ceilings (TYPE I.C.)
3-Year Warranty
* Use only one of the following 26W fluorescent lamps:
G.E. F26DBXT4/E/827
G.E. F26DBXT4/SPX27
PANASONIC FQ26E27/2
PHILIPS PL-26W/827/ALTO
OSRAM/SYLVANIA CF26DD/827
NEMA Type CFQ26W/G24D/827
NuTone 99271311
INSTALLATION
Complete installation instructions are included with each Fan /
Light / Night Light.