Filter
Top Products
6 |
PROLINE
ranGe HooDs
filters
1. Remove the stainless steel filters from the bottom of the hood.
2. Locate the existing raised support screws (A) on each side of the internal
motor(s).
3. For each motor side, position charcoal filter over its support screw and rotate
to lock into place.
charcoal lter
We recommend venting your hood directly outdoors if at all possible. If you do not
have the option to vent your hood outside, charcoal filters are a convenient alterna-
tive. These filters clean impurities and odors from the air as it recirculates through
your home.
Please note: We recommend you replace your charcoal filters after 150 hours
of cooking, or every 3-6 months, depending on how often you cook.
Stainless steel lter
The stainless steel filter is equipped with
a spring loaded handle. To remove from
the hood,