Filter
Top Products
10
MOVING YOUR PERFECT TEMP -
BEFORE YOU GO!
? Preheat the Perfect Temp indoors using the standard electrical cord and outlet.
? Place the rack in the desired position.
? Place hot, cooked food into the chamber.
? Be sure door is firmly closed.
? Unplug the unit and remove the cord.
? Grasp the unit on both sides using the built in side handles.
? Be sure to always carry the Perfect Temp level and away from your body to avoid
burns from food spillage or steam.
USE IN TRANSIT
? Place the unit on a flat, stable surface in the back of your vehicle.
? Using the 6 foot AC adaptor, plug the proper end of the cord into the Perfect
Temp and the adaptor end into the lighter in your vehicle.
? The protective lining will help insulate the warming element from the surface of
your vehicle.
? The food will stay hot for up to 3 hours.
? When transporting items with sauces, gravy or other liquids, be aware that sharp
turns, stops and starts will cause the liquid to splash around in the container.
Use a container with a lid for proper sealing.
?
USE AS A WARMING TRAY
? CAUTION: Base surface is HOT and can exceed 200°F. Use caution when
handling base without the top of the unit attached.
? Set up the base unit as described above and do not assemble or attach the top
of the Perfect Temp.
AUTOMATIC SHUT-OFF FEATURE
? The Salter® Perfect Temp is built with an auto shut-off feature for safety
purposes. If you accidently forget to shut the unit off, it will turn itself off in 3
hours. The element will stop warming the unit and the LOW, MEDIUM, HIGH
light will turn off, but the power indicator light will remain lit. The means the unit is
plugged in but not warming.
? To over ride the auto shut-off feature, simply turn the unit back on after the unit
turns itself off. It will remain on for an additional 3 hours.
? It is not recommended to keep food in the Perfect Temp for more than the initial 3
hours as bacteria can begin to develop in certain foods.
Never use the Perfect Temp as a warming tray only, while in transit. The surface
of the base is hot and can exceed 200°F. If using the Perfect Temp in transit,
always use with the top of the unit attached. Use caution when handling the base
without the top of the unit attached.
? If you are transporting the Perfect Temp and wish to use it as a warming tray,
transport it with the top of the unit attached and only remove the top of the unit
inside when you have reached your destination. Remove the top with caution,
using oven mitts as the base will be very hot. Do not place unprotected hands on
the base to remove the unit’s top