Filter
Top Products
30_ Operating
CHANGING THE INTERIOR LIGHTS
Refrigerator Light Replacement
1. Unplug the power cord from the outlet.
2. Open the refrigerator door.
3. Pull the light cover down while pushing it backwards to remove it.
4. Disconnect the housing connector.
5. Change the LED from the light cover
6. Install the light cover, close the door, and plug in the power cord.
Before changing any of the interior lights, either unplug the refrigerator or turn off power at the circuit
breaker or fuse box. Failure to do so could cause electric shock resulting in death, personal injury, or
damage to the appliance.
1. Unplug the power cord from the outlet.
2. Open the freezer door.
3. Pull the shield down while pushing it backwards to remove it.
4. Disconnect the housing connector.
5. Change the LED from the light cover.
6. Install the light cover, close the door, and plug in the power cord.
WARNING
Operating your SAMSUNG Refrigerator
Replacement LED is available from your nearest service center. If you need to change LED, contact our
service center
DA68-01845B.indb 30 2010.4.24 10:20:58 AM