![](http://pdfasset.owneriq.net/c/d4/cd43bb8a-1bb2-4fdf-bbaa-6f7a0e738875/cd43bb8a-1bb2-4fdf-bbaa-6f7a0e738875-bg11.png)
Setting Up
01
1. Locate the height-adjuster (
) in the freezer drawer.
Unscrew the four Phillips screws (
2
) slightly to loosen the door.
2. Loosen the controller screw(
3
) with a Phillips
screwdriver.
3. Find the best level to align the door slope.
Freezer Drawer
Adjustment part
2
3
Example) The slope is about 2mm (0.08inch) as shown below.
- Rotate the Height Adjuster to +2.0 to reduce the door
slope.
Slope
Reference
plane