Filter
Top Products
28
CHANGING THE INSIDE LAMP
Before changing the inside lamp, make sure that your unit has been disconnected
from the power supply. If you experience difficulty when attempting to change the
lamp, contact your service center.
WRANING
INDOOR LAMP IN THE FREEZER
1 2 3
1 2 3
After place driver at the
designated location ( ),
please push to arrow
direction.
Pull the cover following
arrow.
After exchanging the
lamp in the freezing
section. Fix the lamp
cover.
Remove the screw with
driver and lamp cover.
Pull the old interior lamp
downward to remove.
Then replace with new
interior lamp.
After locate the lamp
cover on the original
position. Fix the screw
with driver following
arrow direction.
INDOOR LAMP IN THE REFRIGERATOR
–
+
+
SR-S24NTA/ENG(NEW) 11/15/59 3:54 PM Page 29