Filter
Top Products
WOLF DOWNDRAFT VENTILATION SYSTEMS
ADJUSTABLE DISCHARGE
Wolf downdraft systems have an adjustable
discharge that will allow you to negotiate
ducting around floor joists and other obstacles.
DISCHARGE CUT-OUT
DIMENSIONS:
260 mm x 89 mm
INTERNAL BLOWER
362 mm x 89 mm
IN-LINE OR
REMOTE BLOWER
CENTERLINE OF COUNTERTOP CUT-OUT
416 mm
INTERNAL BLOWER
546 mm
IN-LINE OR
REMOTE BLOWER
140 mm
INTERNAL BLOWER
108 mm
IN-LINE OR
REMOTE BLOWER
C
L
562 mm
INTERNAL BLOWER
483 mm
IN-LINE OR
REMOTE BLOWER
RIGHT
DISCHARGE
LOCATION
LEFT
DISCHARGE
LOCATION
CENTERLINE OF COUNTERTOP CUT-OUT
362 mm x 89 mm
IN-LINE OR
REMOTE BLOWER
CENTERLINE OF COUNTERTOP CUT-OUT
140 mm
INTERNAL BLOWER
108 mm
IN-LINE OR
REMOTE BLOWER
C
L
NOTE: Measurements are to centerline of duct cut-outs
ADJUSTMENT:
127 mm MAX
IN-LINE OR
REMOTE BLOWER
ADJUSTMENT:
25 mm – 178 mm
INTERNAL BLOWER
165 mm MAX
IN-LINE OR
REMOTE BLOWER
BOTTOM
DISCHARGE
LOCATION
Downdraft adjustable discharge
Three different discharge locations are avail-
able with side-to-side adjustment for accurate
alignment of ductwork. The blower is shipped
with the discharge facing down. Refer to the
illustration below for the discharge location
and adjustment that best suits your installa-
tion.
14