Filter
Top Products
5
The Control Panel
1. LCD Window
The window indicates the Menu setting, the
Crust colour and the Loaf Size. The display
will show the number of hours and minutes
until the cycle is complete – “0:00”.
2. Timer Buttons
Use to adjust the BAKE ONLY time and to
set the Delay Start timer.
Increases the time in 10 minute intervals
Decreases the time in 10 minute
intervals
3. Loaf Size Button
Press the SIZE button to select the loaf size
– 500g, 750g or 1.0kg. The default loaf size
is 1.0kg.
4. Menu Button
Press the MENU button to select automatic
breadmaking menus from (1) to (13). Each
of these menus is explained further on page
6. Each time you press the MENU button it
cycles through the menus from (1) to (13).
The default menu is Menu 1. In addition,
there is a 14th menu – Bake Only. To access
the Bake Only setting, press the BAKE ONLY
button.
5. Bake Only Button
Use this button to activate the BAKE ONLY
setting, then adjust the time needed by using
the timer buttons.
6. Crust Button
Press the CRUST button to select the desired
crust colour – Light, Medium or Dark. The
default crust colour setting is Medium. For
the Turbo menus, the crust is set to Medium.
7. Start / Stop Button
Press to commence selected setting or begin
timer countdown for delay timer. To stop the
operation or cancel a timer setting, press and
hold for 2-3 seconds to clear.
1
2
3
4
5
6
7