Filter
Top Products
Page 7
9. Remove the left side vertical trim bracket
(three screws) (MT27B only).
10. Slide the assembled microwave oven part
way into the prepared cabinet cutout.
Plug the electrical cord in the wall recep-
tacle (ask for help from another person).
Slide oven in the rest of the way into the
cabinet. Position base pan on cabinet
shelf with respect to the center line as
shown on Figure 5. The front end of pan
should align flush with the front edge of
the shelf.
Fasten base pan to shelf with
two (2) screws #8 x 1/4.
11. Re-install the left side vertical trim bracket
(MT27B only).
12. Snap on the frame trim with the
Thermador logo above the microwave
door
(Figure 6).
13. Install the turntable support and the
turntable inside the microwave oven.
14. Follow the Care & Use manual for oper-
ating instructions.
Step 5: Installing The Microwave Oven (continued)
Figure 5
Figure 6
Frame Trim