Hardware Connection
1
Quick Installation Guide
300Mbps Wireless N Router
MODEL NO. TL-WR940N/TL-WR941ND
7106504456 V4.1.0
Package Contents
QIG
300Mbps Wireless N Router
MODEL NO. TL-WR940N/TL-WR941ND
Resource CD
1
Insert the TP-LINK Resource CD into the CD-ROM drive.
2
Select
TL-WR941ND
and click
Easy Setup
Assistant
.
3
Ethernet Cable
TL-WR940N/TL-WR941ND
Power Adapter
Connect the WAN port on your router to the modem’s LAN port with an Ethernet cable.
Connect your computer to one of the LAN ports labeled 1~4 on the router with an Ethernet cable.
Plug the provided power adapter into the POWER jack on the back of the router and the other end to a standard electrical wall socket.
Press the ON/OFF button to power on the router.
1
2
3
Power o your modem.
4
5
Power on the modem and wait for one minute .
23
To LAN port
Cable/DSL Modem
To WAN port
5
4
Wall Socket
Wall Socket
Internet
To the modem’s LAN port
WPS/RESET
ON/OFF
Ethernet cable
Ethernet cable
1. Please confirm that the WLAN light is ON so that client devices can connect to the router wirelessly. Press the Wireless button
(in the front panel) for more than 2 seconds to turn on or turn off the wireless function.
2. The product model shown in this QIG is TL-WR941ND, as an example.
You can click WEB management interface for more
advanced settings.
Please select your preferred conguration method:
Method 1 >> Conguration via CD Setup Wizard
For Windows users only
Method 2 >> Conguration via Web-based Quick Setup Wizard
For Mac OS/Linux users or Windows users who cannot run mini CD
Please select your preferred conguration method:
Method 1 >> Conguration via CD Setup Wizard
For Windows users only
Method 2 >> Conguration via Web-based Quick Setup Wizard
For Mac OS/Linux users or Windows users who cannot run mini CD
Method 1 >> Conguration via CD Setup Wizard
This method is only for Windows users who can run the mini CD.
Select your language from the drop-down menu.
Click START and
the Easy Setup Assistant will
guide you step by step to set up the Router.
4
Follow the instructions until you see the screen
below. Click FINISH to complete the setup.
Method 2 >> Conguration via Web-based Quick Setup Wizard
1
Open your browser and type http://tplinklogin.net in the
address eld, then use the user name admin and password
admin to log in.
2
Click Quick Setup in the main menu and click Next.
This method is for Mac OS/Linux users or Windows users who cannot run the mini CD.
If the login window fails to pop up or you cannot access the
management page after the login window, please refer to
Troubleshooting-2.
The Router will automatically detect the Internet
connection. If the Internet is available, the Router will
direct you to Step 5; otherwise, you need to continue
with Step 3.
3
Select Auto-Detect to detect the Internet connection type
and click Next. (The Dynamic IP is the suitable connection
type for most cases, so we take it as an example in the
following.)
(To be continued...)
