Ultimate Products Food Chopper Food Processor User Manual


  Open as PDF
of 4
 
A. Chopper Lid
B. Chopping Blade
C. Chopping Bowl
D. Start Lever
E. Base Unit
C H O P P E R A S S E M B L Y A N D O P E R A T I O N
1
Firmly press Chopping Bowl (C) onto
Base Unit (E). Carefully place Chopping
Blade (B) onto center shaft of Base
Unit until it clicks into position.
C H O P P E R A S S E M B L Y
2
Add Chopper Lid (A) to Base Unit by
aligning blue dot on Chopper Lid with
blue dot on Base Unit (as shown).
3
1
2 3
Twist Chopper Lid counter-clockwise
until it clicks into place. The Ultimate
Chopper
™
will not start unless the
Chopper Lid is locked into place.
DO NOT PLUG IN ULTIMATE CHOPPER
®
UNIT UNTIL COMPLETELY
ASSEMBLED AND READY FOR OPERATION.
C H O P P E R O P E R A T I O N
Remove Chopper Lid by turning it
clockwise. Add desired amount of food
into Chopping Bowl. BE CAREFUL NOT
TO TOUCH CHOPPER BLADE. Do not
fill Chopping Bowl with more than
recomended of food quantity. Replace
Chopper Lid and turn counterclockwise
until it clicks into place.
Unplug unit. Remove Chopper Lid by
turning clockwise. Carefully remove
Chopping Blade by pressing and hold-
ing center button while pulling straight
up. Hold Base Unit with one hand while
slowly removing Chopping Bowl to
avoid spilling contents.
Plug unit into outlet. Press and hold
Start Lever (D) to begin chopping.
Release Start Lever to stop. To avoid
overheating unit, do not hold down
Start Lever for more than 3 seconds
at a time.
C H O P P E R M O D E
3
4
U N PA C K I N G I N S T R U C T I O N S
1. Place the box containing your Ultimate Chopper
™
on a flat, sturdy surface
before unpacking. Be sure the box is right side up.
2. Remove top foam piece and carefully lift Ultimate Chopper
™
unit from box.
3. Remove Instruction Manual and The Ultimate Recipe Book from box.
4. Place the Ultimate Chopper
™
on a counter or table and read the
instructions thoroughly before using the machine.
5. Save the shipping cartons and foam blocks. You may want to use them
at a later date.
6. To assemble and operate the Ultimate Chopper
™
, follow the “Chopper Assembly
And Operation” instructions on pages 3 and 4 of this Instruction Booklet.
Before using for the first time: Wash all parts according to the “Cleaning
and Maintenance” section on page 5 of this booklet to remove any dust
or residue.
USE CAUTION WHEN HANDL ING CHO PPER BL ADE.
 previous