Filter
Top Products
— 5 —
Installing Stacked Ovens
1. Stack ovens after basic oven is installed.
2. Lift top oven and place it on top of bottom oven.
3. No fasteners are required; the weight of the oven will keep it in place.
LEVELING
Casters for this oven are of the non-adjustable type. For best results oven should be installed on a level
floor.
ELECTRICAL CONNECTIONS
WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE
APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE ANSI/NFPA 70 (LATEST EDITION)
AND/OR OTHER LOCAL ELECTRICAL CODES.
WARNING: DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE
DISCONNECT SWITCH TO INDICATE YOU ARE WORKING ON THE CIRCUIT.
1. Remove wiring compartment cover from the right rear of the oven.
2. Run power supply cord through the conduit fitting.
3. Connect wires at the terminal block.
4. Follow the appropriate wiring diagram that is included with this manual when making connections
at the electric supply lines.
5. Replace wiring compartment cover.
6. Turn power supply ON.
Electrical Data
Nominal Amps Per Line Wire
3 Phase 1 Phase
Oven Model Total Kw 208V 240V 480V 208V 240V
VEC3018
10 28 24 12 48 42
15 42 36 18 72 63
VEC4018 15 42 36 18 72 63
VEC3624 30 83 72 36 144 125
VEC3632 30 83 72 36 144 125
VEC4824 45 125 108 54 216 188
VEC4832 45 125 108 54 216 188
VEC6024 60 166 144 72 288 250
VEC6032 60 166 144 72 288 250