West Bend Corn Popper Popcorn Poppers User Manual


 
1
WEST BEND
STIR CRAZY® CORN POPPER
Register this and other West Bend® products through our website: www.westbend.com
IMPORTANT SAFEGUARDS
Use electricity safely and wisely. Observe safety precautions when using your Stir Crazy corn popper including the following:
Read all instructions before using.
Always attach cord to corn popper first, then plug cord into wall outlet. After popping, unplug cord from wall outlet. Let
corn popper cool before removing cord. Do not leave corn popper plugged in when it is not being used.
Corn popper should always be unplugged before cleaning.
Corn popper should not be left unattended when it is plugged into an outlet.
Do not let cord touch hot surfaces or hang over the edge of a counter, table or other surface area.
Your corn popper, its cord and plugs should not be used outdoors, immersed in liquid, placed near a hot gas or electric
burner, or placed in a heated oven.
Do not touch corn popper when it is hot. Use handles for lifting or carrying. Be very careful when moving corn popper if it
contains hot oil.
Extreme caution must be used when unloading popcorn. Always turn the unit over a countertop so that residual hot oil or
water running out will not cause burns.
Supervise closely when corn popper is being used by or near children.
Use your corn popper only for the cooking tasks described in this booklet. Do not use attachments with your corn popper
unless recommended by The West Bend Company.
Do not use Corn popper if it or its cord have been damaged or if it is not working properly.
SAVE THESE INSTRUCTIONS
Your corn popper needs no special care other than cleaning. If servicing becomes necessary, please return your corn popper to The
West Bend Company. See Warranty Section in this booklet for service details. Do not attempt to repair it yourself.
WARNING: To prevent personal injury or property damage caused by fire, always unplug this and other appliances when not in use.
For Household Use Only.
BEFORE USING THE FIRST TIME
Clean Before Using
CAUTION: To prevent personal injury or electric shock, do not immerse popper base, its cord or plug in water or other liquid.
Wash popper cover and plastic cap in hot soapy water with a sponge or dishcloth. Rinse thoroughly and dry.
To clean stirring rod and non-stick surface of base,
remove rod from base by unscrewing center knob, turning
counter-clockwise. Wipe rod and non-stick surface of
popper base with a soapy cloth. Wipe with a damp cloth
and dry.
Replace stirring rod making sure the rod fits into notched
area around screw. Secure with center knob. Your Stir
Crazy corn popper is now ready for use.