3. Give the refrigerator time to cool down
NOTE: The Automatic Exterior Moisture
completely before adding food. This may
control continuously guards against moisture
take several hours.
build-up on the outside of your refrigerator
The settings indicated above should be
cabinet. This control does not have to be set
correct for normal, household refrigerator
or adjusted.
usage. The controls are set correctly when
milk or juice is as cold as you like and
when ice cream is firm. If you need to
adjust these settings, see “Changing the
control settings” below.
Changing the control settings
If you need to adjust temperatures in
refrigerator or freezer, use the settings listed
in the chart below as a guide.
l Adjust the Refrigerator Control first.
l Wait at least 24 hours between adjustments.
l Then adjust the Freezer Control if needed.
CONDITION:
Refrigerator
section
too warm
Freezer
section
too warm
Refrigerator
section
too cold
RECOMMENDED
REASON:
CONTROL SElTINGS:
Refrigerator
Freezer
l Door opened often
l Large amount of food added
4
A
l Room temperature too warm
l Door opened often
l Large amount of food added
C
*Very cold room temperature
3
(can’t cycle often enough)
@Controls not set correctly
for your conditions
2
B
Ice not
made fast
enough
Both
sections
too warm
l Heavy ice usage
every cold room temperature
(can’t cycle often enough)
l Door opened often
l Large amount of food added
*Very warm or very cold room
temperatures
3
C
4
B