Filter
Top Products
First-Last...
shelf positions
1. Control panel
2. Cooling fan* (not visible)
3. Top heating element (can be lowered)
4. Oven light
5. Round heating element (not visible)
6. Fan
7. Door hinge
8. Oven cool door
*N.B.:
The cooling fan switches on only
when the oven has reached a certain
temperature.
After the oven switches off, the cooling fan
may, however, continue to run for a certain
time to ensure proper cooling.
ACCESSORIES
•Grid
• Grill pan set
• Catalytic panels
OVEN FUNCTIONS TABLE
Function
Function
Preset
temperature/level
Function description
(see details in the user’s manual)
Symbol Nr.
– – OVEN OFF - -
– – OVEN LIGHT - To switch on the oven light.
2
MLTF
(Heat Maintenance)
35C
To keep a constant temperature,
either 35°C or 60°C.
3 STATIC 200C
To cook food at one shelf level.
Preheating.
4
PASTRY
(Static+Fan)
175C
To cook on two shelf levels, at the
same temperature.
5 FAN 160C
To cook on more than one shelf
level, at the same temperature.
6 ECONOMY GRILL 3
To grill small pieces of meat, toast,
etc.
7 DUAL VARIABLE GRILL 3
To grill large quantities of small
pieces of meat, toast, etc.
8
TURBOGRILL
(Grill+Fan)
3 To grill large pieces of meat.
9 PROGRAMME P1 To bake pizza, bread, focaccia.
First
Last
PRODUCT DESCRIPTION SHEET
Push-Push knobs
• To use this type of knob, press it in the middle.
• Turn the knob to the desired position.
• Once cooking is over, turn the knob back to the off position and press it again to restore it
to its initial setting.
FOR A DESCRIPTION ON HOW TO USE THE OVEN, PLEASE REFER TO THE
PROGRAMMER DESCRIPTION SHEET.
STARTING THE OVEN
When the oven is connected to the power supply for the first time, or re-connected after a
power failure,
the display shows
“”
.
To start the oven:
• turn
knob 1
with index at the top as in Fig.1 of programmer sheet.
• press
button 3
.
The display shows “--:--”.
5019 100 56061
GB IE
AKZ 188
1. Selector knob: to choose the oven functions.
2. Knob to set: time of day, cooking time, the time at which cooking should terminate, the
temperatures and the power levels (Function
P
).
3. Button to select and confirm the different operations (operate by single presses only).
4. Button to select special function: “Browning” and “Heat Maintenance” .