Filter
Top Products
Using your freezer
Setting the temperature control...
Adjusting the temperature
I. Insert a coin in the slot of the Temperature Control to
c()n&ol...
turn it.
2. Turn control to Number 3. This setting is designed to
l
Turn control to higher number for colder tem-
maintain the temperature at or near 0°F ( - 17.8”C)
peratures.
under normal operating conditions.
l
Turn to lower number for less cold temperatures.
Cooling freezer first...
I. Allow freezer to cool 6 to 8 hours before filling with
frozen food.
2. Let it cool overnight before adding large amount
of
unfrozen food.
NOTE:
When freezer is first started the compressor will
run constantly until the cabinet is cooled. It may take
up to 6 to 8 hours or longer, depending on room tem-
perature and the number of times the freezer lid is
opened.
After the cabinet is cooled the compressor will turn
on and off as needed to keep freezer at proper
temperature.
The outside of your freezer may feel warm. This
is
normal. The freezer’s design and main function is to
remove heat from packages and air space inside the
freezer. This heat is transferred to the room air, so the
outside walls of the freezer may be warm.
loading or unloading food below them.
To remove:
Lift basket(s) out.
To replace:
Lower basket(s) into place.
The sliding baskets...
Can be moved from side to side or removed when
The key eject lock...
can help reduce the hazard of child
entrapment.
--gf
To lock or unlock the freezer you must hold the
key in the lock whrle turning. The lock is spring
loaded so the key cannot be left in the lock.
If the key is lost, contact your WHIRLPOOL
dealer for a replacement Always give the
com-
plete
model and serial number of your freezer
when requesting a replacement key.