Filter
Top Products
Using Your Refrigerator
Continued
EXTERIOR MOISTURE CONTROL
l OFF 0 ON b
yosnv
Exrerlor. klo.is!tireContr@I
The Exterior Mois.ture’Control on tne Control
Console operates electric heaters around the door
openings, These heaters help keep morsture from
forming on the outside of the refrigerator.
1. Use the OFF setting when humidity is low.
2. Use the ON setting if moisture forms on the
outside of Ihe refrigerator.
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way you use
your refngerator. Glass shelves are strong enough
to hold bottles, milk and other heavy food items.
To remove shelves:
1. Remove items from shelf.
2. Tilt up at front.
3. Lift up at back.
4. Pull shelf straight out.
To replace shelves:
1. Gurde the rear hooks into the slots in the shelf
GM and
GK
models:
Glass shelves are
heavy. Be careful.
supports.
2. Tilt up front of shelf until hooks drop Into slot.
Lower front of shelf to level positron.
NOTE: The above Instructions apply to all models
(GM and GK models with glass shelves and NK,
HM and HK models with DURAWHITE” wrre
shelves).
Removing the freezer shelf
Moving the meat drawer and cover
Pull out to the stop, lift the
front and
pull again.
To remove the meat drawer:
1. Slide the meat drawer out to the stop.
2. Loft the rront.
3. Slide the drawer the rest of the way out.
4. Replace in reverse order.
To remove the cover:
1. Tilt front of cover up, lift at back, and pul
strarght out.
2. Replace in reverse order.