The storage drawer
The storage drawer is for storing pots and pans.
The drawer can be removed to make it easier to
clean under the range. Use care when handling
the drawer.
Removing the storage drawer:
1. Empty drawer of any pots and pans before
removing drawer. Pull drawer straight out to
the first stop. Lii front and pull out to the
second stop.
2. Lfft back slightly and slide drawer all the
way out.
Replacing the storage drawer.
1. Pii ends of drawer slide rails into the drawer
guides on both sides of opening.
2. Lii drawer front and push in until metal stops
on drawer slide rails clear white stops on
drawer guides. Lii drawer front again to clear
second stop and slide drawer closed.
Drawer slide
rail
v
The anti-tip bracket
The range will not tip during normal use. How-
ever, tipping can occur if excessive force or
weight is applied to the open door without the
anti-tip bracket properly secured.
To verify the anti-tip bracket is engaged:
l
Look to see if the anti-tip bracket is attached
with screws to the wall behind the control panel.
l
Make sure the cable tether on the back of the
range is secured by the two hooks on the
bracket.
l
See Installation Instructions for further details.
Optional door panel pat
If you would like to change the color of your oven
door glass to white or almond, you can order one
of these kits:
l
White (Kit No. 814069)
l
Almond (Kit No. 814070)
from your Roper Dealer. The kits include easy
installation instructions.
21