Filter
Top Products
Most cooking problems often are caused by little things you can find and fix without tools of
any kind. Check the lists below and on the next page before calling for assistance or service. If
you still need help, see “Requesting Assistance or Service” on page 24.
RANGE ~06 NOT WORK
PROBLEM CAUSE
Nothing works
l
The range is not properly connected to the gas supply. Contact an
authorized Roper service technician to reconnect the range
to the gas supply. (See the Installation Instructions.)
l
You have blown a household fuse or tripped a circuit breaker.
l
The control knob is not set correctly. Push in the control knobs before
turning them.
PROBLEM
CAUSE
The oven does
not work
l
You have not turned the oven temperature control knob to a
temperature setting.
l
The main or regulator gas shutoff valve is in the off position.
(See
the
Installation Instructions.)
The burner fails to light
l
The ignitor is broken. Contact an authorized Roper service technician to
replace it.
l
You have blown a household fuse or tripped a circuit breaker.
The burner flames lift
away from the ports,
are yellow, or are noisy
l
The air/gas mixture is incorrect. Contact an authorized Roper service
technician to check the air/gas mixture or see the Installation Instructions.
22