Filter
Top Products
Page 3-5
3-5
Cooking Products Service Manual
Original July, 1996 4321891
© 1996 Whirlpool Corporation
REMOVING A SEALED BURNER & A VENTURI
WARNING
REMOVING A VENTURI
1. Turn off the gas to the range and disconnect
the power cord from the wall outlet.
2. Lift the maintop and prop it up (use the proce-
dure on page 3-2).
3. Lift the defective venturi from the burner box
and replace it with a new one.
4. Lift the top of the coil around both venturi
openings so they are even with the top.
5. Reassemble the range.
BURNER
BOX
INSERT TAB
INTO SLOT
SLIDE COIL UP
TO TOP OF VENTURI
Electrical Shock Hazard
Disconnect from electrical supply before servic-
ing unit.
Failure to do so could result in death or electri-
cal shock.
CAUTION: When you work on the gas range, be
careful when handling the sheet metal parts. Sharp
edges may be present, and you can cut yourself if
you are not careful.
REMOVING A BURNER
1. Turn off the gas to the range and disconnect
the power cord from the wall outlet.
2. Remove the grates and burner caps from the
maintop.
3. Remove the screws from the defective burner.
SCREW
MAINTOP
BURNER
4. Lift the defective burner off the venturi and
replace it with a new one, then reassemble
the range.
VENTURI
MAINTOP
BURNER
BURNER
IGNITOR