Filter
Top Products
3-6
REMOVING A CONVENTIONAL BURNER
4. If installed, remove the shipping screw from
the burner, then lift and unhook the burner
from the burner bracket, and remove it from
the range.
WARNING
SHIPPING SCREWS
BURNER
BURNER BRACKET
5. Install the new burner (do not reinstall the
shipping screw).
6. Reassemble the range.
CAUTION: When you work on the gas range, be
careful when handling the sheet metal parts. Sharp
edges may be present, and you can cut yourself if
you are not careful.
Electrical Shock Hazard
Disconnect from electrical supply before servic-
ing unit.
Failure to do so could result in death or electri-
cal shock.
1. Turn off the gas to the range and disconnect
the power cord from the wall outlet.
2. Remove the grates from the maintop.
3. Lift the maintop until the support rods lock.