Filter
Top Products
The oven light
The oven light will come on when you open
the oven door.
Electrical Shock Hazard
Make sure oven and light bulb are cool
and power to the range has been turned
off before replacing the light bulb.
The bulb cover must be in place when
using the oven. The cover protects the
bulb from breaking, and from high oven
1
temperatures. Because the bulb cover is
made of glass, be careful not to drop it.
I.’
Farlure to follow the above could result
In electrical shock, burns, or injury from
1 broken glass.
To replace the oven light:
1. Unplug appliance or disconnect at the
main power supply.
2. Remove the glass bulb cover in the back
of the oven by pushing the wire holder to
the side and pulling out bulb cover.
3. Remove the light bulb from its socket.
Replace the bulb with a 40-watt appli-
ance bulb.
4. Replace the bulb cover and snap the
wire holder into place. Plug in appliance
or reconnect at the main power supply.
NOTE: The oven light should not be used
during the Self-Cleaning cycle. Use during
the Self-Cleaning cycle will shorten the life
of the bulb.
27