Filter
Top Products
The oven light
The oven light will come on when you open the
oven door. To turn the light on when the oven
door is closed, use the Oven Light Switch on
the control panel.
Electrical Shock and
Personal Injury Hazard
l
Make sure oven and light bulb are cool
and power to the range has been turned
OFF before replacing the light bulb.
Failure to do so could result in electrical
shock or burns.
l
The bulb cover must be in place when
using the oven. The cover protects the
bulb from breaking, and from high oven
temperatures. Because bulb cover is
made of glass, be careful not to drop it.
Broken glass could cause injury.
To replace the oven light:
1. Unplug appliance or disconnect at the main
power supply.
2. Remove the glass bulb cover in the back of
the oven by pushing the wire holder to the
side and pulling out bulb cover.
3. Remove the light bulb from its socket.
Replace the bulb with a 40.watt appliance
bulb.
4. Replace the bulb cover and snap the wire
holder into place. Plug in appliance or
reconnect at the main power supply.
NOTE: The oven light should not be used during
the Self-Cleaning cycle. Use during the Self-
Cleaning cycle will shorten the life of the bulb.
31