Whirlpool GZ5736XR Ventilation Hood User Manual


 
PRODUCT MODEL NUMBERS OVERALL DIMENSIONS
VENTING REQUIREMENTS
GZ5730XR
GZ5736XR
Electrical: 120-volt, 60-Hz, AC-only, 15-amp.
electrical supply. Use copper wire only. A time-
delay fuse or circuit breaker and separate circuit is
recommended.
®
30" and 36" Convertible Range Hood
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. 9761370
1-5-05
Roof venting Wall venting
29-7/8" (75.9 cm) model: GZ5730 Series
35-7/8" (91.1 cm) model: GZ5736 Series
7-1/4"
(18.4 cm)
20"
(50.8 cm)
12-5/8"
(32.1 cm)
7" (17.8 cm) round
or 3-1/4" x 10"
(8.3 x 25.4 cm)
through roof
roof cap
24" (61 cm) to
30" (76.2 cm)
above cooking
surface
Round vent:
Use 7" (17.8 cm)
round damper
(purchased
separately)
wall
cap
3-1/4" x 10"
(8.3 x 25.4 cm)
through the wall
7" (17.8 cm)
round
or 3-1/4" x 10"
(8.3 x 25.4 cm)
through the wall
24" (61 cm) to
30" (76.2 cm)
above cooking
surface
90° elbow
wall cap
1 — 90° elbow = 5 ft. (1.5 m)
1 — wall cap = 0 ft. (0 m)
8 ft. (2.4 m) straight = 8 ft. (2.4 m)
system length = 13 ft. (3.9 m)
6 ft. (1.8 m)
2 ft.
(0.6 m)
Example vent
system
Vent piece 7" (17.8 cm) round
45° elbow 2.5 feet
(0.8 m)
90° elbow 5.0 feet
(1.5 m)
7" (17.8 cm) 0 feet
wall cap (0 m)
3-1/4" x 10" (8.3 x 25.4 cm) vent system
7" (17.8 cm) vent system
Recommended standard fittings
Recommended standard fittings
Vent piece 7" (17.8 cm) round
3¹⁄₄" x 10"
4.5 feet
(8.3 x 25.4 cm)
(1.4 m)
to 7" (17.8 cm)
3¹⁄₄" x 10"
5 feet
(8.3 x 25.4 cm)
(1.5 m)
to 7" (17.8 cm)
90° elbow
3-1/4" x 10"
(8.3 x 25.4 cm)
elbow
wall cap
1 — 90° elbow = 5 ft. (1.5 m)
8 ft. (2.4 m) straight = 8 ft. (2.4 m)
1 — wall cap = 0 ft. (0 m)
system length = 13 ft. (3.9 m)
6 ft. (1.8 m)
2 ft.
(0.6 m)
Example vent
system
Vent piece
3¹⁄₄" x 10" (8.3 x 25.4 cm)
3¹⁄₄" x 10"
5 feet
(8.3 x 25.4 cm)
(1.5 m)
90° elbow
3¹⁄₄" x 10"
12 feet
(8.3 x 25.4 cm)
(3.7 m)
flat elbow
3¹⁄₄" x 10"
0 feet
(8.3 x 25.4 cm)
(0 m)
wall cap