Usln
Your Mkrowave Oven
Cont nued
B
Using the Minute Timer
The microwave oven controls can be used as a
minute timer. Use COOK at 0’ Cook Power for
timing up to 99 minutes, 99 seconds.
NOTE: The oven will not operate while the
Minute Timer is in use.
1.
2.
3.
4.
5.
Touch COOK. The STAGE 1 Indicator will
come on and the Display will show “OH and
90
POWER: The TIME Indicator will start to
flash.
Touch Number Pads for the minutes and
seamds you want. The Display will show the
numbers you touched
In the order you
touched them.
This example shows 1 minute,
45 seconds.
Touch COOK POWER. The % POWER
Indicator will start to flash.
Touch the ‘0” Number Pad. The small display
will show ‘00’. This tells you the oven will be
operating at 0% power.
Touch START.
NOTE:
lf you hear the fan start when you
touch START, you have not set the Cook
Power properly. Touch CANCEL and start
over.
The STAGE 1 and % POWER Indicators will stay
on to show you that the timer is running.
The Display counts down to show you how
much time is left. During the countdown the oven
will be dark and the fan will be off.
When the set time ends, ‘End’ will show on the
Display and two short and one long tone will
sound. (You can stop the tones by opening the
door or by touching CANCEL.) ‘End’ will remain
on the Display until the door is opened or
CANCEL is touched. The Display will then show
the time of day.
NOTE: Opening the oven door stops the count-
down. Cbse the door and touch START to
continue the timing countdown.
22