Filter
Top Products
23
CARING FOR YOUR RANGE
REMOVING THE OVEN DOOR (CONT.)
To remove:
1. Open the door about halfway. Insert door
removal pins into both
hinge hangers. Do not
remove them while
the door is removed
from the range.
3. Rotate the door toward the range. Lift up the door
until it stops. Do not use
the door handle to lift the
door. Rotate the door
toward the floor and pull
it toward you.
2. Close the door as far as the door removal pins
will let you.
To replace:
NOTE: The door removal pins you inserted must still
be in both sides of the door.
1. Grasp the door on the sides with your fingers
on the front of the door and your thumbs on the
inside surface.
2. Rest the hinge hanger so that it is flat (at the
bottom of the hinge hanger on the bottom of
the front frame slot).
3. Position the door with the hinge hanger slots
almost parallel to the front frame.
4. Push up and in until the hinge hanger slots
become fastened to the range. Lower the door
and rotate it slightly from the front to the back
until the slots are fully fastened. The hinge
hanger will be close to the bottom of the front
frame slot.
5. Pull door open about halfway and remove the
door removal pins. Save door removal pins for
future use.
6. Close the door.
Oven door
Range
Hinge
hanger
Hinge
hanger
flat
In
Up
Front frame
slot bottom
Remove door
removal pin