Completing the installation
Level freezer so the door will stay open at any
position.
1. Locate and keep the 4 bolts that held the
freezer in the shipping crate OR the 2
threaded leveling legs shipped with the
freezer.
NOTE: The number of legs depends on the
model of your freezer. The 2 threaded
leveling legs are shipped in a separate
package inside the freezer.
2. Screw the bolts/leveling legs all the way into
the holes on the bottom of the freezer. If
you only have 2 leveling legs, screw them
into the front corners of the freezer.
3. Slide the freezer into place.
4. Adjust each bolt/leveling leg until the freezer
does not rock.
l To lower a corner, turn leg clockwise.
l To raise a corner, turn leg counterclock
wise.
5. Check freezer with a level.
6. Fill freezer with food and recheck with a
level.