Filter
Top Products
Changing the light bulb
(on some models)
Electrical Shock Hazard
Before removing the light bulb, either turn
, Temperature Control to OFF and unplug the
freezer, or disconnect the electricity leading
to the freezer at the main power supply.
Shock and injury can occur if electricity
remains connected.
To replace interlor Ilght:
1. Turn Temperature Control to OFF and
disconnect freezer from power supply.
NOTE: Turning Temperature Control to OFF
does not disconnect power to the freezer.
2. Remove the light shield from the side of the
Control Panel. Depress the back of the light
shield to release the tabs, then pull away.
3. Replace the bulb with a 40-watt appliance
bulb.
4. Replace the light shield. Inset-t the tabs into
the slots on the Control Panel. Then press
the shield to snap it into place.
5. Reconnect freezer to power supply and refer to
“Setting the temperature control” on page 7.