Filter
Top Products
19
Terminal box wire:
white
black
ground connector
Power supply wire:
white
black
ground wire
Wiring configuration
If needed, see website for animated representation
of this step. Visit www.whirlpool.com/electrical under
FAQ tab.
Tighten strain relief screws to secure cable.
Direct Wire—Secure cable
in strain relief
4
Place wires inside terminal box. Insert tabs on left side
of cover. Make sure wires are tucked inside box. Close
cover ensuring wires are not pinched. Use ¹⁄₄" nut driver
and previously removed screw to secure cover.
Direct Wire—Reinstall
terminal box cover
5
NOTE: Do not drop screws into bottom of dishwasher.
Locate brackets on top of dishwasher and secure
dishwasher to countertop with two, #10 x ¹⁄₂" Phillips-head
screws (included). The dishwasher must be secured to
keep it from shifting when door is opened.
Secure dishwasher
3
screw to
side cabinet
Open dishwasher door, remove lower dish rack, and
place towel over pump assembly and lower spray arm of
dishwasher. This will prohibit screws from falling into
pump area when securing dishwasher to countertop.
Remove lower dish rack
and place towel
2
Secure Dishwasher in Cabinet
Opening
1
Double-check dishwasher
alignment in cabinet opening
Check that dishwasher is still level front-to-back and
side-to-side in cabinet opening.