Whirlpool W10282549A Dishwasher User Manual


 
7
(3.8 cm)
Power Supply CordDrill hole
1
Pref rred location
Pref rred location
Preferred location
Optional location
Optional location
Optional location
Drill a 1¹⁄₂" (3.8 cm) hole in cabinet side or rear.
See product and cabinet opening dimensions.
NOTE: A grounded 3 prong outlet is required inside a
cabinet next to the dishwasher cabinet opening.
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Disconnect power
1
2
Water line
Cable
Do you already have utility
hookups?
3
Existing utility hookups No existing utility hookups
Yes Follow instructions in the Prepare Cabinet
OpeningExisting Utilities section.
No Follow instructions in the Prepare Cabinet
OpeningNew Utilities section.
Prepare Cabinet Opening—New
Utilities
What type of electrical
connection will you use?
Power Supply Cord:
Follow Option A instructions
Direct Wire:
Follow Option B instructions
Prepare and route the electrical supply
Option A, Power Supply Cord:
6
(15.2 cm)
1
Water line
Cable
Check water and electrical
placement
If the water line and the cable extend to the locations
shown, proceed to the Install Drain Hose section. If they
do not reach far enough, follow the instructions in the
Prepare Cabinet OpeningNew Utilities section.
Prepare Cabinet Opening—Existing
Utilities
INSTALLATION INSTRUCTIONS