Filter
Top Products
Using Your Dishwasher
Models WU565OX (shown)
WU4406X
wu44oox
WU3006X
wu3ooox
Fktra-capadty
fold
down shelf
Silverware basket
Spray tower
Bottom rack
1 Sh3nmre basket
-Lower spray arm
1 Overfill protector
- Detergent dispenser
L Access panel
Heating
element
color panel
Model and serial
nr--- ^-_-A -lx----- -..I%.^- I-L-I
nluse ayeuL cus-SeI u- -A
(on right side)
The drawings in this book may vary
slightly from your dishwasher model.
They are designed to show the different
features of all the models covered by this
book
NOTE: Your model may not include all
the features shown.
Before starting dishwasher
1. Read ‘Important Safety
Instructions” on page 2 before
starting your dishwasher.
2. Properly load the top and bottom
racks, and silverware basket. (See
pages 6 and 7.)
3. Spin the lower spray arm to make
sure nothing will stop it from
turning freely.
4. Add detergent. See page 7.
5. Check rinse agent dispenser. See
page 8.
6. Push door firmly when closing and
it will automatically latch.
7. Run hot water at sink nearest
dishwasher until it is hot. Turn it
Off.
Starting dishwasher
1. Select a drying option. (Select
ENERGY SAVER for the Rinse &
Hold Cycle.)
2. Select any other desired options
that are available.
Models WU3WOX, WU3666X,
WU44OOX, VVU4466X - Options may
be changed or cancelled by pushing
the Option Selector Button(s) again.
Model WU565oX - Options may be
changed or cancelled by pushing
the RESET OPTIONS Button, then
pushing new Option Selector
Button(s).
3. Turn the Cycle Control Knob
clockwise to point to a desired
cycle. You will feel a definite stop
at each cycle mark? The dishv&i%her
will automatically start that cycle.
NOTE: If the door is latched, you will
hear cycles start and stop as the knob
passes each cycle mark. This is normal
and will not hurt the dishwasher. If you
prefer, you can set cycles with the door
unlatched.
Page 3