Filter
Top Products
MAINTENANCE & CLEANING OF BREWER
Regular and preventive maintenance is essential in keeping your Alpha system looking and working
like new.
CAUTION When cleaning your Alpha System, do not use cleansers, bleach liquids, powders or any
other substance that contains chlorine. These products promote corrosion and will pit the stainless
steel. USE OF THESE PRODUCTS WILL VOID WARRANTY.
PREVENTIVE MAINTENANCE
1. Remove the sprayhead from the brewer and clean it once a week or more often in heavy lime
areas.
2. Clean the faucet seat cup and replace it if cracked or leaking.
3. The inside of the heating tank should be de-limed at least every six months and more often in
areas with especially hard water.
CLEANING
Using a daily routine of cleaning the external parts of the Alpha brewing system should maintain its
new appearance and better tasting coffee.
1. Wipe off any spills, dust or debris from the exterior surfaces.
2. Clean the outside of the brewer with stainless steel polish. Coarser agents may scratch the
machine.
3. Slide out brew cone. Rinse thoroughly with clean water.
4. Remove the sprayhead and clean. Clean around the dome area, wiping with a non-toxic cleaner.
5. Clean the brew cone rails with a damp cloth or brush.
6. Dry thoroughly with a clean cloth.
[ 3 ]