Zanussi 285772 Pasta Maker User Manual


 
ZANUSSI
P R O F E S S I O N A L
PASTA COOKERS
SNACK 600
SCPE 350
Supply voltage 400 V, 3N, 50/60
Net weight - kg. 33 35
installed-electric 5
Power - kW
gas 10
Power - kW
N° of wells 1 1
height 290 290
depth 340 340
width 305 305
Usable well dimensions - mm
height 850 850
depth 600 600
width 350 350
External dimensions - mm
Power supply Electric Gas
SCPE350
285758
SCPG350
285772
CHARACTERISTICS MODELS
TECHNICAL DATA
RANGE
COMPOSITION
Ideal for smaller sized catering
establishments: bars, pubs, fast food
outlets, pizzerias and small hotels;
the Snack 600 range of modular
cooking appliances consists of a
series of appliances each with a
depth of 600 mm - in gas and
electric - featuring high power for
fast service whether in table top
situations, where space is at a
premium, or in a complete cooking
installation, using the base units that
can include doors, drawers or
runners for gastronorm containers.
FUNCTIONAL AND
CONSTRUCTION
FEATURES
Constructed completely in 18/10,
304 AISI stainless steel to guarantee
a hard-wearing performance. The
units include stainless steel height
adjustable feet
Hygiene guaranteed by rounded
edges, flush fit between units, side
upstands and sealing joints,
completely smooth and easy to
clean surfaces
Stainless steel pressed well, 15/10
in thickness, for use with 2/3 GN
containers/baskets.
Overflow and water drain by
means of an overflowpipe
Well filling by means of an
overflowpipe
False bottom, to support the
baskets, supplied as standard.
Baskets are not supplied as
standard and therefore must be
ordered as accessories
All models comply with the
standards required by the main
international approval bodies and
are H marked.
ELECTRIC MODELS
Heating via incoloy armoured
steel elements placed under the well
Thermostatic temperature control
High limit safety thermostat
GAS MODELS
Burners placed under the well
Automatic piezo ignition, flame
failure device and pilot light
The gas appliances are supplied
for use with natural gas, with LPG
conversion jets supplied as standard.
Tap valve.
installation diagram: B - Cold water inlet; C - Water
drain