Filter
Top Products
ZANUSSI
P R O F E S S I O N A L
304 AISI WALL TYPE HOODS
SUPERTREDILWASH - SW line - 1300mm
Supply voltage 220 V, 1N,
50/60
220 V, 1N,
50/60
220 V, 1N,
50/60
220 V, 1N,
50/60
220 V, 1N,
50/60
220 V, 1N,
50/60
220 V, 1N,
50/60
220 V, 1N,
50/60
Net weight - kg. 93 114 133 157 179 200 222 243
Inlet Air Capacity - mc/h 1320 1740 1920 2220 2640 3000 3360 3720
Air Capacity - mc/h 1800 2300 2900 3500 4100 4600 5200 5800
height 500 500 500 500 500 500 500 500
depth 1300 1300 1300 1300 1300 1300 1300 1300
width 1200 1600 2000 2400 2800 3200 3600 4000
External dimensions - mm
STWP1312
640243
STWP1316
640244
STWP1320
640245
STWP1324
640246
STWP1328
640247
STWP1332
640248
STWP1336
640249
STWP1340
640043
CHARACTERISTICS MODELS
TECHNICAL DATA
RANGE
COMPOSITION
A range of hoods supplementing the
‘inductive emission’ principle and
automatic filter washing.
Untreated air is introduced inside to
partly compensate for that removed.
This results in better drawing of
fumes towards the filter surface and
reduced air-treatment costs. The
inside filters have water sprayer
nozzles controlled by the special
panel which controls washing
functions. The range consists of
hoods with 8 different lengths (1200,
1600, 2000, 2400, 2800, 3200, 3600
and 4000 mm) and 1300 mm deep.
FUNCTIONAL AND
CONSTRUCTION
FEATURES
� Constructed entirely in 304 AISI
stainless steel.
� Compensated flow exhaust
system (air inlet from outdoors).
� Automatic built-in filter-washing.
� Supplied with "CHICANE" filter
packs in 304 AISI stainless steel with
built-in lighting and drain pipe diam.=
1 1/2" in 304 AISI stainless steel.
� Brass nozzles with full
cone-shaped jets and fast joints in
stainless steel complete with gasket
and nylon connector.
� Water pipes in 304 AISI stainless
steel.
� All parts in contact with the inlet
air flow, at external temperature, are
insulated to avoid condensation.
� Eyebolts and screw anchors for
ceiling installation.
� Heating and air conditioning costs
reduced up to 60%.